RPE and RIR Explained: How to Choose Weights and Adjust Every Workout
RPERIRstrength trainingworkout planningprogressive overloadworkout tracking

RPE and RIR Explained: How to Choose Weights and Adjust Every Workout

FFountain of Fit Editorial Team
2026-11-18
7 min read

Learn how to use RPE and RIR to choose weights, adjust each set, and track strength-training progress with a practical worksheet.

RPE and RIR give you a practical way to choose weights without guessing. This guide explains both scales, includes a reps-in-reserve chart, and shows how to adjust dumbbells, machines, resistance bands, and bodyweight exercises from set to set. Use the worksheet at the end to make each workout easier to review and improve.

Overview

RPE means rating of perceived exertion. It describes how difficult a set felt on a scale from 1 to 10. RIR means reps in reserve: the number of good-form repetitions you believe you could still complete when the set ends.

The two systems describe nearly the same idea from different directions. A set rated RPE 8 usually means you had about two repetitions left, or 2 RIR. RPE 10 means you reached the point where another controlled repetition was unlikely. RPE 6 suggests that roughly four repetitions remained.

These tools are especially useful when your energy, sleep, stress, equipment, or training experience changes. Instead of forcing the same weight every session, you can keep the effort appropriate for the day. That makes RPE and RIR useful additions to a beginner strength-training plan, a home workout plan, or a more structured progressive-overload program.

RPE is not a measure of pain. Stop a set if you feel sharp pain, unusual joint symptoms, dizziness, or a loss of control. When in doubt, choose a lighter variation or seek guidance from a qualified health professional.

What to track

Use this RPE and RIR reference chart

RPEApproximate RIRWhat the set feels likeTypical use
5 or below5 or moreComfortable; plenty of repetitions remainWarm-ups, technique practice, recovery sessions
6About 4Moderately challenging, with clear reserveEasy training days and early sets
7About 3Challenging but controlledGeneral fitness and many working sets
8About 2Hard; two good repetitions may remainMost productive strength and muscle-building sets
9About 1Very hard; one good repetition may remainOccasional demanding sets when technique stays solid
100No additional controlled repetition is availableUse selectively; not necessary for every set

The chart is a guide, not a laboratory measurement. Your estimate may be less precise on unfamiliar exercises, high-repetition sets, or movements where balance and coordination limit performance before the target muscle does. With practice, comparing your estimate with the next repetition or set can make your ratings more consistent.

Record more than the weight

A useful workout tracker records the exercise, equipment, load, repetitions, sets, actual RPE or RIR, and a brief note about technique. Also record the target range. For example: “Goblet squat, 20 pounds, 3 sets of 8–10, target RPE 7–8.” This shows whether the load was appropriate, rather than merely showing that a number increased.

For a complete record, add sleep or energy, soreness, and any equipment limitations. You do not need a detailed journal. A one-word note such as “fresh,” “stiff,” or “rushed” can explain why today’s performance differed from last week’s. You can combine these fields with the workout progress tracker template.

Track effort across different types of resistance

  • Free weights: Record the total load and whether the final repetitions stayed controlled. If dumbbell sizes increase in large jumps, adjust repetitions or tempo before making a major load increase.
  • Machines: Record the machine name, seat or setting position, and selected resistance. Different machines can use different resistance systems, so compare progress mainly on the same equipment.
  • Resistance bands: Note the band color or length, anchor position, and how far the band was stretched. Band tension changes through the movement, so effort and form are more useful than the label alone.
  • Bodyweight exercises: Track the variation, repetitions, range of motion, tempo, and rest. A push-up from a bench, a standard push-up, and a feet-elevated push-up are different loads even if no external weight is used.

Cadence and checkpoints

Use RPE or RIR during every working set, but make decisions at three useful checkpoints: before the workout, after the first working set, and during your weekly or monthly review.

Before the workout: set a target

Choose a target based on the purpose of the session. A reasonable general target for many working sets is RPE 7–8, leaving approximately two to three good repetitions in reserve. Technique practice, a low-impact home workout, or a return after time away may call for RPE 5–7. A demanding set can be closer to RPE 9, but high effort should not replace sound form or recovery.

Write the target before lifting. If you wait until after the set, it is easier to confuse the planned effort with the actual effort.

After the first working set: calibrate

Ask three questions:

  1. How many clean repetitions could I have performed?
  2. Did the final repetition look like the first, or did technique change?
  3. Was the difficulty caused by the target muscles, breathing, grip, balance, or discomfort?

If the set was much easier than planned, add a small amount of resistance, perform one or two additional repetitions within the prescribed range, or use the same load and reassess. If it was harder than planned, reduce the load, shorten the set, or choose an easier variation. Make one change at a time so you know what improved the result.

At the end of the week or block: review the pattern

Look at several sessions rather than reacting to one unusual workout. A weekly review works well for a new program; a monthly or quarterly review can be useful for a longer training block. Compare the same exercise, variation, repetition range, and equipment whenever possible.

How to interpret changes

If the same load feels easier: First confirm that your range of motion, tempo, and technique are consistent. If they are, add a small amount of resistance, add a repetition within your planned range, or progress to a slightly harder bodyweight variation. This is progressive overload without treating heavier weight as the only form of progress.

If the same load suddenly feels harder: Check the context before changing the program. Poor sleep, accumulated fatigue, stress, soreness, a longer workday, or a different setup can affect performance. Reduce the load or stop with more repetitions in reserve if form is deteriorating. One difficult session does not necessarily mean your strength has declined.

If repetitions rise but RPE stays similar: That is usually a useful sign that your capacity is improving, provided the movement standard remains the same. Record both the repetitions and effort so the change is visible.

If RPE is low but the movement feels unstable: Do not automatically add weight. Stability, coordination, or mobility may be the limiting factor. Use a simpler variation, reduce the range temporarily, slow the tempo, or obtain instruction. Effort and readiness are not the same as technical mastery.

If every session is RPE 9 or 10: Your target may be too ambitious, your recovery may be insufficient, or the program may include too much volume. Try leaving one or two additional repetitions in reserve for a short period and reassess. A sustainable program should allow you to train consistently, not just survive individual workouts.

For goals involving body composition, effort tracking works best alongside regular habits such as adequate protein, sleep, and recovery. See the practical guidance on body recomposition planning and daily protein targets for related planning considerations.

When to revisit

Revisit your RPE and RIR records at the end of each training week, and complete a broader review every four to six weeks or whenever your program changes. The purpose is not to chase a perfect score. It is to find patterns that help you train with appropriate effort.

Use this short worksheet after each session:

  • Exercise and variation: ______________________________
  • Target sets, repetitions, and RPE: ____________________
  • Load, band, machine setting, or bodyweight variation: ____________________
  • Actual repetitions and RPE/RIR for each set: ____________________
  • Technique note: ______________________________
  • Energy, soreness, or recovery note: ____________________
  • Next-session adjustment: keep, increase, decrease, or change variation: ____________________

At the next review, look for three things: exercises that are consistently below the target effort, exercises that repeatedly exceed it, and movements where technique changes before the intended muscles are challenged. Adjust those movements first. Keep successful exercises stable long enough to learn from the data.

Refresh the worksheet when your equipment, exercise selection, repetition goals, or training schedule changes. If you are returning after illness, injury, pregnancy, or a long break, use conservative targets and consider professional guidance. For ongoing planning, pair this tracker with a structured low-impact home workout plan or your existing strength routine. The most useful record is the one you can complete consistently and use to make calm, informed adjustments.

Related Topics

#RPE#RIR#strength training#workout planning#progressive overload#workout tracking
F

Fountain of Fit Editorial Team

Wellness Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.